Christmas Teddy Bear Amigurumi Free Pattern

Necessary materials and tools:
1. Yarn of a DC color for the Bears body (I have Alize Cotton Gold No. 21
(gray)), edge DC (Alize Cotton Gold No. 243), white (Alize Cotton Gold No. 01),dark blue (Alize Cotton Gold No. 245), Alize Softy No. 55 (white)
2. Filler (holofiber)
3. Hook number 2
4. Black beads for eyes d4 mm (4 pcs)
5. Spout 13 * 15 mm black (2 pcs)
6. Blue ribbon 3 mm wide
7. White beads d6 mm 7pcs, d4 mm 1pcs
8. Glue
9. Black thread floss for decoration muzzle
10. Long needle for stitching parts11. Scissors When using these materials, the finished toy size is 12cm.

Terms;
sc> single crochet
inc> increase
dec> decrease
Ch> chain
Blo> knitting from the loop
Flo> knitting from the front loop
SL-ST> slip-stitch

HEAD 2 pcs
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7 row: (5 sc, inc) * 6 (42)
8-13 row (6 rows): 42 sc
14 row: (5 sc, dec) * 6 (36)
15 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
16 row: (3 sc, dec) * 6 (24) begin to fill
17 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
18 row: (1 sc, dec) * 6 (12) fill to the end
19 row: 6 dec (6) pull the hole, hide tail.

EAR
Knit 2 color details and 2 details white color. Do not fill.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 18 sc, sl-st
Cut the thread, leaving a long end for sewing, fold your ear in half and sew two side for the loops of the last row.

Muzzle
We knit 1 color and 1 white colors.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (3 sc, inc) * 3 (15)
4 row: 15 sc, sl-st
Cut the thread, leaving a long end for sewing, do not fill.

HEAD REGISTRATION
Symmetrically sew the ears to the head between 4 and 11 rows (i.e., 5 to 10 rows), try them first and fix needles.
Then center between 10 and 17 rows place the muzzle, fill it a little in sewing processes.
We divide the floss thread in half and fix at the bottom of the head, put the thread in the middle spout, make a stitch in 2 layers, 3 rows down and we deduce where the eyes will be, leave.
Glue the nose. Sew the eyes between 10 and 11 rows (rasl-standing between them 4 sc or 5 sc, depending on the density of knitting), pass the thread 2-3 times, slightly pulling in sewing processes if 5 sc rasst-stoyanie. With the same thread we embroider the eyebrows, output the thread at the bottom of the head, fasten, trim.

BODY OF FATHER FROST

Knit with color yarn, fill tightly as you knit.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7-8 row (2 rows): 36 sc
9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
10 row: we change the thread to the edge and knit for rear floor hinges (30 BLO)
11-13 (3 rows): 30 sc
14 row: (3 sc, dec) * 6 (24)
15 row: 24 sc – start to fill
16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
17 row: 18 sc – fill
18 row: (1 sc, dec) * 6, sl-st (12)– fill up the end.
Cut the thread, leaving a long end for sewing, fill.
In the 10th row, where we knit for the rear floors of the loop for the remaining floor loops we knit 30 sc yarn Alize Softy.

BODY
Knit with DC color yarn, fill tightly as you knit.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7-8 row (2 rows): 36 sc
9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
10-11 (2 rows): 30 sc
12 row: change the thread to dark blue and knit 30 sc
13 row: we knit a loop 30 sc for the rear floor (30 BLO)
14 row: (3 sc, dec) * 6 (24)
15 row: 24 sc – start filling
16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
17 row: 18 sc – fill
18 row: (1 sc, dec) * 6, sl-st (12) – fill to the end.

Cut the thread, leaving a long end for sewing, fill.

DRESS

In the 13th row, where we knit for the rear floors of the loop,mfor the remaining floor loops begin to knit skirt.

1 row: 3 ch, 1 DC in one loop, one loop skip to the next 1DC, ch, 1DC, then DCow we skip the loop and the next 1DC, ch, 1DC, continue to the end of the row, sl-st at the end.

2 row: 2 ch, 1DC, ch, 2DC in one loop as shown in the photo, then in each air loop of the previous row 2DC, ch, 2DC, sl-st in the end.

3 row: 2 ch, 1DC, ch, 2DC in one loop, then in each air loop of the previous row 2DC, ch, 2DC, sl-st at the end.

4 row: 3 ch, 2HDC, ch, 3 HDC in one loop, then into each air loop previous row 3HDC, ch, 3 HDC, sl-st at the end.

5 row: change the thread to Alize Softy and knit sc in each loop, sl-st at the end, fasten the thread and crop.

FRONT FEET
We will knit 2 legs with a red blouse and 2 pcs with dark blue. We start to knit with yarn of DC color.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3-4 (2 rows): 12 sc
5 row: 4 sc, dec, dec, 4 sc (10)
6 row: change the thread to the edge DC (Santa Claus) either on a dark blue (DC little girl) and knit for rear floor hinges 10 sc
7-12 (6 rows): 10 sc, fill the part tightly, but not much
13 row: 4dec (6)
Cut the thread, tighten the hole and hide thread inside the part.
In the 6th row, where we knitted for the rear floor of the loop, for the remaining half loops knit 10 sc yarn Alize Softy.

HINDER FEET 4pcs
Knit with DC color yarn, fill tightly as you knit.
1 row: 6 ch
2 row: 4 sc in the second loop from the hook, 3 sc in loop the top, then knit on another chain side: 3 sc, inc (12)
3 row: inc, 3 sc, 3inc, 3sc, 2inc (18)
4 row: 1 sc, inc, 4 sc, inc, 3 sc, inc, 4 sc, inc, 2 sc (22)
5-6 (2 rows): 22 sc
7 row: 7 sc, 4dec, 7 sc (18)
8 row: (1 sc, dec) * 6 (12)
9-14 (6 rows): 12 sc
15 row: 6 dec (6)
Cut the thread, tighten the hole and hide thread inside the part

TAIL
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: 12 sc

More Amigurumi Christmas Teddy Bear Ideas

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!