Amigurumi Cat Free Pattern

MATERİALS AND TOOLS:

Pattern: @ludaorlova_toys
English Translation: @samyelidesign

• Yarn: Gazzal Baby Cotton half-cotton 50g / 165m, color No. 3430 (gray), color
• No. 3438 (dark blue), color No. 3431 (jeans), color No. 3432 (white), color No. 3443(Red poppy)
• Hook: 2 mm
• Fiberfill
• Beads for eyes with a diameter of 6 mm
• A bit of black, white and pink yarn for embroidery
• Needle for stitching, scissors, pins, marker for knitting
• Cut fabric size 27 * 9 cm (for scarves)
• Buttons – 2pcs
• Sewing machine (optional)

ABBREVİATİONS:
 mr – magic ring
st– stitch
 sc– single crochet
 ch – chain
 inc – increase
 dec – decrease
 ss – slip stitch
 dc – double crochetThe size of the finished toy using these materials is about 20 cm

ARMS: (2 pcs)
Link two parts. Stuff in the process of knitting. Tightly fill the bottom,
further fill medium, the top part is not necessary to fill.Start with gray color
1) 6 sc in to mr (6)
2) 6 inc (12)
3-6) sc in each st around (12)
Change color to white.
7-8) sc in each st around (12)
Change the yarn to dark blue.
9-10) sc in each st around (12)
Change color to white.
11-12) sc in each st around (12)
Change the yarn to dark blue.
13-14) sc in each st around (12)
Change color to white.
15-16) sc in each st around (12)
Change the yarn to dark blue.
17-18) sc in each st around (12)
Change color to white.
19-20) sc in each st around (12)
Change the yarn to dark blue.
21-22) sc in each st around (12)
Change color to white.
23) sc in each st around (12)Knit another 6 sc, then fold the edges of the parts together, knit 6 sc.
Yarn to fasten, cut off.

TAİL:
Stuff in the process knitting. Tightly fill the bottom, then to fill medium, the upper part is not necessary to fill.Start with gray color
1) 6 sc in to mr (6)
2) 6 inc (12)
3-25) sc in each st around (12) (23 rnds)

Fold the edges of the parts together, knit 6 sc. Yarn to fasten, cut off.

LEGS AND BODY:
First knit the first leg. Legs and body tight stuff in the knitting process.Start with gray color
1) 6 sc in to mr (6)
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) sc, inc, (2 sc, inc)*5, sc (24)
5-7) sc in each st around (24)
8: 6 sc, 6dec, 6sc (18)
9: (4 sc, dec)*3 (15)
10-12) sc in each st around (15)
13: (4 sc, inc)*3 (18)
14-16) sc in each st around (18)
17: (5 sc, inc)*3 (21)Knit another 7sc, ss.

Finish knitting, yarn to fasten and cut the yarn.Tie the second leg in the same way as the first, but after 17 rows, knit another 18 sc.
The thread does not cut, and continue to knit the body. (You may need another
the number of loops after the 17th row, then you need to adjust it yourself.)18) From the second leg dial a chain of
6 ch and attach to the first leg where
finished knitting (in the loop following
ss). Make sure the legs look
straight.
Next knit 21 sc on the first part,
6 st chain of air loops, 21 sc
on the second part, 6 sc on the back
chains of air loops (54)
In this place you need to set the marker
(marker is in front)19-26) sc in each st around (54) (8 rnds)
In the next row you need to engage the tail.
Make sure that the tail is located
exactly in the middle.27) 22 sc, 6 sc with the tail, 26 sc (54)
28) (7 sc, dec)*6 (48)Next, you need to align the marker exactly middle of the back. For this I needed knit 22 sc (you might need
knit a different number of loops), and in
Next loop change color to dark blue.
Now here will be the beginning of the next row, set the marker.

29-30) sc in each st around (48)
Change color to white.
31) sc in each st around (48)
32) (10 sc, dec)*4 (44)
Change the yarn to dark blue.
33-34) sc in each st around (44)
Change color to white.
35-36) sc in each st around (44)
Change the yarn to dark blue.
37-38) sc in each st around (44)
Change color to white.
39) sc in each st around (44)
40) (9 sc, dec)*4 (40)
Change the yarn to dark blue.
41-42) sc in each st around (40)
Change color to white.
43) (8 sc, dec)*4 (36)In the next row you need to knit arms.
Make sure that they are located symmetrically on the sides of the body.44) 9 sc, 6 sc with the arm, 12 sc, 6 sc with the arm, 3 sc (36)
Change the yarn to dark blue.
45) (4 sc, dec)*6 (30)
46) sc in each st around (30)
Change the yarn to gray.
47) (3 sc, dec)*6 (24)
48-49) sc in each st around (24)
Taurus is ready. Further, without tearing the yarns, continue to knit your head. We fill very tightly

HEAD:
50) 24 inc (48)
51) (7 sc, inc)*6 (54)
52) 4 sc, inc, (8 sc, inc)*5, 4 sc (60)
53-64) sc in each st around (60)
65) 4 sc, dec, (8 sc, dec)*5, 4 sc (54)
66) (7 sc, dec)*6 (48)
67) 3 sc, dec, (6 sc, dec)*5, 3 sc (42)
68) (5 sc, dec)*6 (36)
69) 2 sc, dec, (4 sc, dec)*5, 2 sc (30)
70) (3 sc, dec)*6 (24)
71) sc, dec, (2 sc, dec)*5, sc (18)
72) (sc, dec)*6 (12)Fasten off and cut the yarn, leaving a long tip with which to pull off the remaining hole. The tail of the yarn is hidden inside the head.

EARS (2 pcs)
Link the two details in gray. No need to stuff.1) 6 sc in to mr (6)
2) (sc, inc)*3 (9)
3) (2 sc, inc)*3 (12)
4: (5 sc, inc)*2 (14)
5: (6 sc, inc)*2 (16)
6: (7 sc, inc)*2 (18)
7: (8 sc, inc)*2 (20)Yarn to fasten, cut, leaving
long end for sewing.

MUZZLE:
Start with white color
1) 6 sc in to mr (6)
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) sc, inc, (2 sc, inc)*5, inc (24)
5) (3 sc, inc)*6 (30)
6) sc in each st around (30)
Yarn fasten, cut, leaving a long
the end for sewing.First you need to sew the muzzle.
Locate the face approximately between 51 and 61 next heads, pin pins (make sure that it is located in the center).
Sew, in the process of sewing inside, put the filler.
On both sides of the muzzle sew eyes. To do this, mark with pins. The locations of the peepholes, which are between 59 and 60 near the head, the distance between the points is 10-11sc. When sewing, make a small tie white yarn stitches around the peephole to look
turned out to be more “alive”. Black yarn you can add eyelid rather.On the muzzle with pins mark the location of the nose, embroider with pink yarn.
Embroider mouth with black yarn, eyebrows and antennae.
Pins mark the location of the ears, sew approximately between 61 and 70 next (make sure the ears are sewn symmetrically).

TROUSERS:
Knitting pants starts at the top.
Color “jeans” dial a chain of
54 ch and with the help of ss to close it in a circle.
1) 2 ch lifting, 54 dc, ss (54)
2) (8 sc, inc )*6 (60)
3-7) sc in each st around (60)
In the next row you need to do hole for the tail.
8) Dial a chain of 6 ch, 6sc previous row skip, continue knitting in the next loop, 54 sc (60)
9-18) sc in each st around (60) (10 rnds)Next, knitting is divided as follows:
28 sc (pant leg), 2 sc, 28 sc (pant leg), 2sc.
It is necessary to arrange the leg so that
the hole for the tail was exactly in the middle.
For this I needed to knit 4 sc
(maybe you will have a different amount
loops), then count down 28 sc and connect to a circle. Continue knitting already at 28 loops.
19-29) sc in each st around (28) (11 rnds)
Finish knitting ss, fasten and cut the thread,
hide thread tip.Next, go back to the beginning of knitting trousers, count off from the first 2 sc (this will be the distance between them), tie the thread, leaving a loose tail about 20cm.Count off 28 sc, use ss to connect
in a circle and knit again 11 rows of 28 sc.
Next, finish the knitting ss, fasten and yarn cut off, the tip of the thread hide.
Sew up the tip of the yarn distance between the legs.

POCKET:
Knit in rotating rows, each row start with a 1ch climb.
Dial a chain of 10 ch + 1ch lifting.
First row start from the 2nd from hook loop.
1-8) 10 sc
To tie the sides of the pocket sbn yarn fasten and cut off leaving a long tip for
sewing on

WEBBİNG:
Tie 2 pieces of the desired length. To me
it took to dial 28 ch maybe you will have a different amount (depends on the density of knitting).
Knit in rotating rows. When typing
initial chain, leave free tail about 20 cm.
Dial a chain of 28 ch + 1 ch lifting.
First row start from the 2nd from hook loop.
1) 28 sc, 1ch lifting
2) sc in each st around (28)Yarn to fasten and cut, leaving tip for sewing.
Sew the straps to the pants, fronts sew decorative buttons.Sew a pocket.

BERET:
Start with white color
1) 6 sc in to mr (6)
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5) (3 sc, inc)*6 (30)
6) (4 sc, inc)*6 (36)
7) (5 sc, inc)*6 (42)
8) (6 sc, inc)*6 (48) 
9) (7 sc, inc)*6 (54)
10) (8 sc, inc)*6 (60)
11) (9 sc, inc)*6 (66)
12) (10 sc, inc)*6 (72)
13) (11 sc, inc)*6 (78)
14) (12 sc, inc)*6 (84)
15-17) sc in each st around (84)
18) (12sc, dec)*6 (78)
19) (11sc, dec)*6 (72) 
20) (10sc, dec)*6 (66)
21) sc in each st around (66)Finish knitting ss, fasten and yarn
cut off, the tip of the yarn hide.

POMPON:Knit in red, fill in the process
knitting.
Start with red color
1) 6 sc in to mr (6)
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5-8) sc in each st around (24)
9) (2 sc, dec)*6 (18)
10) (sc, dec)*6 (12)Yarn fasten, cut, leaving a long the end for sewing.
Pompon sew to the top of the beret.

SOLİTAİRE:
On paper, make a pattern in the size indicated on the photo.
Transfer the pattern to the fabric, leave the allowances of 0.7-1 cm for hemming, cut.
Process edges, bend and stitch