• 100% cotton balls, green, pink and brown.
• Crochet according to the thickness of the ball used. In this pattern I used cotton NINFA and crochet of 3’5mm.
• Fill.
• Flat 12 mm safety eyes (you can use the ones you like best).
• Wire, tongs and bodybuilder’s tape (optional).
• Hot silicone gun (optional).
• Needle wool.
• Scissors and turn marker.

Abreviations:
mr. – magic ring
ch – chain stitch
st – stitch
sc – single stitch.
inc – increase.
dec – decrease.
Rnd – round
(nº) – The number inside parentheses are the total stitch of the round. Ex: (24), in total 24 stitch in that round.
*…* – Repeat the instructions between the asterisks for the entire round.
(…)xN: repeat the instructions between the parentheses N times. Ex: (2sc, 1dec) x3, would indicate kniting 2sc, 1dec, 2sc, 1dec, 2sc, 1dec.

Body of the tree:
We begin to kniting by the tip of the tree.
In green color:

Rnd1: 6sc in mr
Rnd2: 6 sc
Rnd3: *1sc, 1 inc* (9)
Rnd4: 9sc
Rnd5: *2sc, 1 inc* (12)
Rnd6: 12sc
Rnd7: *3sc, 1 inc* (15)
Rnd8: 15sc
Rnd9: *4sc, 1 inc* (18)
Rnd10: 18sc
Rnd11: *5sc, 1 inc* (21)
Rnd12: 21sc
Rnd13: *6sc, 1 inc* (24)
Rnd14: 24sc
Rnd15: *7sc, 1 inc* (27)
Rnd16: 27sc
Rnd17: *8sc, 1 inc* (30)
Rnd18: 30sc
Rnd19: *9sc, 1 inc* (33)
Rnd20: 33sc
Rnd21: *10sc, 1 inc* (36)
Rnd22: 36sc
Rnd23: *11sc, 1 inc* (39)
Rnd24: 39sc
Rnd25: *12sc, 1 inc* (42)
Rnd26: 42sc
Rnd27: *13sc, 1 inc* (45)
Rnd28: 45sc
Rnd29: *14sc, 1 inc* (48)
Rnd30: 48sc
Rnd31: *15sc, 1 inc* (51)
Rnd32: 51sc
Rnd33: *16sc, 1 inc* (54)
Rnd34: 54sc
Rnd35: *17sc, 1 inc* (57)
Rnd36: 57sc
Rnd37: *18sc, 1 inc* (60)
Rnd38: 60sc
Rnd39: *19sc, 1 inc* (63)
Rnd40: 63sc
Rnd41: *20sc, 1 inc* (66)
Rnd42-43: 66sc

From here we continue kniting to close the tree below. You can also knit a separate circle, the size of the base of the tree and sew it to cover it, as you find it easier, just keep in mind when sewing it, take the back loops the stitch of each part and place the eyes, stuffing and embroider the details BEFORE sewing it completely.

Rnd44: BACK LOOPS 66sc
Rnd45: (6sc, 1dec)x8, 1 dec.
Rnd46: (5sc, 1dec)x7, 6sc, 1 dec. take the last three stitch.
Rnd47: *4sc, 1dec*

We stop here. It is a good time to put your eyes and embroider the details. The eyes are placed between the Rnd39 – 40, with approximately 8 sts of separation.

Rnd48: *3sc, 1dec*
Rnd49: *2sc, 1dec*
Stuffing.
Rnd50: *2sc, 1dec*
Rnd51: *1sc, 1dec*

Close. You can close the fabric by making decreases until closing or finishing and cutting leaving a long thread on the Rnd51. With that thread sew picking only the front loops of each stitch all the way round, pull hard and close.

Arms (x2):
Brown:
Rnd1: 4sc in mr.
Rnd2 onwards:4sc

Work until approximately 2’76 inches of arm.
We fasten of and cut, leaving a long tail to sew the body.

Legs (x2):
Brown:
Rnd1: 5sc in mr.
Rnd2: 5 inc (10)
Rnd3: 10sc
Rnd4: 5 dec (5)
Rnd5 onwards: 5sc

Work until 4’3-4’5 inches of leg.
We fasten of and cut, leaving a long tail to sew the body.

For the assembly of arms and legs. We can fill and sew, or we can fill them with wire so that both arms and legs are mobile and stay in the position we want.
To prepare the wire for arms, we measure from the tip of one arm to the other, passing through the body (through the area where we are going to sew). We cut that wire measurement. We bend the ends of the wire so that it does not come out through the fabric, and we cover the wire with a layer of bodybuilder’s tape. We start at one point, and, when we are at something more than half, we stop. We put the wire through the part that we already have covered with tape on one arm, we pass the wire through the body, and we continue covering with tape to the tip. We put the other arm and sew it to the body. We can help ourselves with some pins, both to see where we put the wire and to see where we sew the arms.
For legs wire is more or less the same as with the arms, only that the wire goes in a U-shape, and we must leave a distance between the legs to cross the body as the distance we want to put between the legs , I left about 0’79 inches, about 5 stitches away when sewing legs.

Ornament garland:
For the garland I used two yarn together of light pink and fuchsia for 2 mm crochet. Chains are made up to about 33-34 inches in length. Help yourself with pins to place around the tree, doing 5 laps. You can sew it or stick it with hot silicone.

Star (x2):
Two equal parts are made, then they are sewn and stuffing soft.

Yellow:

Rnd1: 5sc in mr
Rnd2: 5 inc (10)
Rnd3: *1sc, 1inc* (15)
Rnd4: *2sc, 1inc* (20)

Here we begin to knitting the tips of the star. They are made by rows.

Rnd5: 1º tip: 3sc, 1ch. turn, skip 1stitch, 2sc, 1ch. and turn. Skip 1stitch, 1sc. Fasten off and cut.

2º tip: we hook the yarn in the next stitch of Rnd4. We knit 1 sc in the same stitch where we have hooked, 3 sc (in total 4 sc), 1ch. and turn. We skip 1stitch, 3sc, 1ch and turn. We skip 1stitch, 2sc, 1ch and turn. We skip 1stitch, 1sc, fasten off and cut.

3º, 4º and 5º tips: like the 2nd tip, just hook the strand in each next stitch of rnd4.

Once woven the two parts are sewn by the edge. Stuffing soft before finishing sewing. It is then stitched or glued with silicone to the tip of the tree.

More Amigurumi Christmas Tree Kawaii Ideas:

Desinger : https://talesoftwistedfibers.wordpress.com/
This is an original pattern by Tales of Twisted Fibers

MATERIALS
light worsted weight yarn in white,
black, red, green, orange
2.5 mm crochet hook
a pair of 9 mm safety eyes
fiberfill
yarn needle
black sewing thread
wire & wire cutter

HEAD
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: (2 sc , 1 inc) around. (24)
Round 5: (3 sc, 1 inc) around. (30)
Round 6: (4 sc, 1 inc) around. (36)
Round 7: (5 sc, 1 inc) around. (42)
Round 8: (6 sc, 1 inc) around. (48)
Round 9-15: Sc around. (48)
Round 16: (6 sc, 1 dec) around. (42)
Round 17: (5 sc, 1 dec) around. (36)
Round 18: (4 sc, 1 dec) around. (30)
Round 19: (3 sc, 1 dec) around. (24)
Round 20: (2 sc, 1 dec) around. (18)
Round 21: (1 sc, 1 dec) around. (12)
FO. Insert safety eyes and stuff firmly.

NOSE
Round 1: Sc 3 in a magic ring with orange
yarn. (3)
Round 2: Sc around. (3)
Round 3: 2 sc in each st around. (6)
Sew nose to face. Embroider mouth with
black sewing thread.

HAT
Round 1: With black, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: (2 sc , 1 inc) around. (24)
Round 5: (3 sc, 1 inc) around. (30)
Round 6: (4 sc, 1 inc) around. (36)
Round 7: Sc around in BLO. (36)
Round 8-12: Sc around. (36)
Round 13: (4 sc, 1 dec) around. (30)
Round 14-16: Sc around. (30)
Round 17-18: Join red and sc around. (30)
Round 19: Join black, (sc 1, inc 1) X 15. Sl st
to join. (45)
Round 20: Ch 1, (sc 2, inc 1) X 15. Sl st to
join. (60)
Round 21: Ch 1, (sc 3, inc 1) X 15. Sl st to
join. (75)
Round 22: Ch 1, sc around, sl st to join.
Stuff lightly and sew to head.

BOOTS & LEGS (make 2)
Round 1: With black, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (sc 1, inc 1) around. (18)
Round 4-5: Sc around. (18)
Round 6: (sc2tog) X 4, sc 10. (14)
Round 7: (sc2tog) X 5, sc 4. (9)
Stuff foot lightly.
Round 8-11: Sc around. (9)
Round 12: (sc 2, inc 1) X3. (12)
Round 13: (sc 1, inc 1) X 6. (18)
Round 14: Sc around in BLO. Sl st to the beginning
of the round to join. (18)
Round 15: Ch 1, sc around, join with a sl st. (18)
Round 16: Join white and working in front loops of
the last round, sc around. (18)
Round 17-19: Sc around. (18)
Round 20: Join legs: Working with white, hold
both legs together, making sure they face the same
direction, and insert hook into the 2 stitches that
meet in the center, YO and make a sc. Continue
making sc stitches around both legs. (36)

BODY
Round 21: Inc 1, sc 16, inc 2, sc 16, inc 1.
(40)
Round 22-23: Sc around.
Round 24: (sc 6, dec 1) X 5. (35)
Round 25: Sc around.
Round 26: (sc 5, dec 1) X 5. (30)
Round 27: Sc around.
Round 28: (sc 4, dec 1) X 5. (25)
Round 29: Sc around.
Round 30: (sc 3, dec 1) X 5. (20)
Round 31-32: Sc around.
Round 33: (sc 2, dec 1) X 5. (15)
Stuff.
Round 34: (sc 1, dec 1) X 5. (10)
Round 35: Sc around.
FO and stuff.

ARMS (make 2)
Round 1: With white, sc 6 in a magic ring.
(6)
Round 2: 2 sc in each st around. (12)
Round 3-5: Sc around,
Round 6: Dec 4, sc 4. (8)
Round 7-17: Sc around.
Stuff.
Now you can either dec all around and
sew arm to body or give it posable limbs
by inserting wire through the arms
(recommended if you want your snowman
to hold a Christmas banner). If you have
never made posable limbs for your
amigurumi before, here’s a great photo
tutorial by Allison Hoffman of CraftyisCool.
Click here to go to Allison’s blog
Once the limbs are attached, sew head to
body.

BUTTONS (make 2)
Sc 6 in a magic ring with black. Join with a sl st.
Cut off yarn leaving a long tail for sewing and
sew to body

SCARF
With green, ch your desired length and add an
additional 3 chains. Starting from 3rd ch from
the hook, dc across. FO and weave in ends.
To make baubles:
Round 1: Sc 6 in a magic ring. (6)
Round 2: 2 sc in each st around. (12)
Round 3-5: sc around. (12)
Round 6: Dec around. (6)
Stuff and sew close. Sew baubles to the ends
of the scarf and tie it around the snowman’s
neck.