Abbreviations
AR – Amigurumi Magic ring
MR – Amigurumi Magic ring
3in1 – crochet 3 columns in one loop
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st or Slst: Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only

Body
We start crocheting with a white yarn
1. 6sc in MR
2. 6inc=12
3. (1sc, 1inc)*6 =18
4. (2sc, 1inc)*6 =24
5. (3sc, 1inc)*6= 30
6. 1sc, 1inc, (4 sc, 1inc)*5, 3sc=36
7. (5sc, 1inc)*6=42
8. 3sc, 1inc, (6sc, 1inc)*5, 3sc=48

9. to 13. rows repeat 48 loops
14. (6 sc, 1dec)*6=42
15. (12 sc, 1dec)*3=39
16. 5sc, 1dec, (11 sc, 1dec)*2, 6sc, = 36
17. to 21. rows repeat 36 loops
Change the yarn to black
22. (10sc, 1dec)*3 =33
23. 3 sc, 1dec, (9 sc, 1dec)*2, 6 sc =30
24. (8sc, 1dec)*3 =27
25. 26. rows crochet 27 loops
We leave the yarn of the required length for sewing on the head, cut it off. The body is evenly stuffed with filler.

Head
We begin to crochet the head from the muzzle, white yarn
1. 6 sc in MR
2. 6inc =12
3. 2sc, 3sc in one loop * 2, 4 sc, 3sc in one loop * 2, 2sc= 20
4. to 5. rows repeat 20 loops
6. 5 sc, 10 inc, 5 sc = 30
7. 9 sc, (1inc.,1sc)*3, (1sc,1inc)*3, 9sc = 36
8. 6sc, (1inc.,2sc)*4, (2 sc, 1inc.)*4, 6sc= 44
9. 13sc, (1inc.,4sc)*3, 1inc., 16 sc= 48 At the end of the row we crochet 2 loops more to shift the beginning of crocheting to the center of the muzzle.

10. 11 sc, (1inc.,4sc)*5, 1inc., 11 sc= 54
11. to 18. rows repeat 54 loops
19. 9sc, 3dec, 24sc., 3 dec., 9sc.=48
By decreasing the loops in a row, we get a very light oval effect. If you need a completely round head, then subtract in the usual way: (7sc, 1dec)*6=48.
20. 3sc, 1dec., (6sc,1dec)*5, 3sc= 42
21. (5sc,1dec)*6= 36

We fill the head with filler. We make sure that the muzzle is densely filled.
We continue crocheting.
22. 2sc., 1dec., (4sc, 1dec.)*5, 2sc= 30
23. (3sc., 1dec)*6= 24
24. (2sc., 1dec)*6= 18
25. (1sc., 1dec)*6= 12
We fill the head with filler
26. 6dec = 6
We tighten the ring, cut the yarn, hide.
Sew the head to the body. We embroider the nose with black yarns, as shown in the picture.

Lower paws
Chain of 6ch
1. 2 sc in the second from the hook, 3 sc, 4 sc in one loop, 3 sc, 2 sc in last = 14
2. 3 sc in one loop, 1inc.,4 sc, 2 inc., 4 sc, 1inc., 3 sc in one loop = 22
3. 1sc., 1inc., 18 sc, 1 inc., 1sc = 24
4. 24 loops in a circle
5. 8 sc, 4dec, 8sc=20 Gradually fill the paw
6. 7sc, 3dec, 7sc=17
7. 6sc,2dec, 7sc=15
8. to 13. rows repeat 15 loops (6 rows),
14 (3sc,1dec)*3=12
15. 6 decrease, tighten the hole, cut the yarn.

Upper paws
1. 6 in MR
2. 6inc. = 12
3. (3sc, 1inc)*3=15
4. 13sc, 1dec. =14
5. 12 sc, 1dec.= 13
6. 11 sc, 1dec.=12
7. 10 sc, 1dec.=11
8. 9 sc, 1dec.=10.
Fold the foot in half, sew with a needle, sew to the body.

Spots
1. 6 in MR
2. We crochet this row immediately with the transition to the next 1sc and 2 st.dc in one loop, 3sc, 3 st.dc in one loop, 3slst.
We crochet the second spot.
3st.dc in one loop, 3sc, 2 st.dc and 1sc in one loop, 3slst.
We sew the spots with the convex side inward (that is, to the nose).

Tail
1. 6 in MR
2. 6 inc.=12
3. 12.
We sew the tail to the body, stuff it with a little bit of filler.

Ears
1. 6 in MR
2. 6 inc.=12
3. 12.
We crochet 2 parts, sew.
We connect all the details. Panda Nastya is ready!

More Amigurumi Panda İdeas

ABBREVIATIONS:
MR – magic ring
Ch – chain
St(es) – stitch(es)
Sl st – slip stitch
Inc – increase
Dec – decrease
Sc – single crochet
Hdc – half double crochet

HEAD
Join rounds with a slip st and chain 1.
Round 1: with ecru 6 sc in a mr – 6 sts
Round 2: 6 inc – 12 sts
Round 3: (sc, inc) x 6 – 18 sts
Round 4: (2 sc, inc) x 6 – 24 sts
Rounds 5 – 10: sc around – 24 sts (6 rounds)
Round 11: (2 sc, dec) x 6 – 18 sts
Round 12: (sc, dec) x 6 – 12 sts
Stuff the head.
Round 13: 6 dec – 6 sts

BODY
Change color depending on animal costume. Continue crocheting in spiral.
Rounds 14: 6 inc – 12 sts
Round 15: (2 sc, inc) x 4 – 16 sts
Rounds 16 – 17: sc around – 16 sts (2 rounds)
Round 18: (3 sc, inc) x 4 – 20 sts
Round 19: (4 sc, inc) x 4 – 24 sts
Rounds 20 – 23: sc around – 24 sts (4 rounds)
Round 24: (2 sc, dec) x 6 – 18 sts
Round 25: (sc, dec) x 6 – 12 sts
Stuff the body.
Round 26: 6 dec – 6 sts
Fasten off and secure the stitches. Set aside.

If you are making a baby panda, use black thread for Rounds 14 – 17. Then change color to white to finish the body.
The eyes are attached between Rounds 8 and 9, about 5 stitches apart.

ARMS (x 2):
Round 1: with ecru 5 sc in a mr – 5 sts
Round 2: (inc, sc) x 2, inc in last st – 8 sts
Round 3: sc around – 8 sts
Change color depending on animal costume.
Round 4: (2 sc, dec) x 2 – 6 sts
Rounds 5 – 9: sc around
Leave a tail for sewing and fasten off

LEGS (x 2):
Use the color for animal costume.
Round 1: (2 sc, 3 hdc, 2 sc) in a mr – 7 sts
Round 2: sc inc in 2 sts, hdc inc in 3 sts, sc inc in 2 sts
– 14 sts
Rounds 3 – 5: 14 sts (3 rounds)
Round 6: 1 sc in 3 sts, 4 sc dec, 1 sc in 3 sts – 10 sts
Stuff the foot.
Round 7: 1 sc in 3 sts, 2 sc dec, 1 sc in 3 sts – 8 sts
Rounds 8 – 10: sc around – 8 sts (3 rounds)
Stuff the leg lightly.
Round 11: 4 dec – 4 sts
Leave a tail for sewing and fasten off.

EARS (x 2):
Use the color for animal costume.
Round 1: 6 sc in a mr – 6 sts
Round 2: 6 inc – 12 sts
Rounds 3 – 5: sc around – 12 sts (3 rounds)
Round 6: sl st around – 12 sts
Leave a tail for sewing and fasten off

TAIL:
Use the color for animal costume.
Round 1: 6 sc in a mr – 6 sts
Round 2: 6 inc – 12 sts
Rounds 3 – 4: sc around – 12 sts (2 rounds)
Round 5: 1 sl st in next 2 sts
Leave a tail for sewing and fasten off.

HAT:
With animal color
Round 1: 6 sc in a mr – 6 sts
Round 2: 6 inc – 12 sts
Round 3: (sc, inc) x 6 – 18 sts
Round 4: (2 sc, inc) x 6 – 24 sts
Round 5: (3 sc, inc) x 6 – 30 sts
Rounds 6 – 10: sc around – 30 sts (5 rounds)
Round 11: 1 sl st in next 2 sts

BINKY:
Leave a long tail before you begin.
Round 1: with pistachio 8 sc in a mr
Sl st to join and fasten off.

Assembly
Glue the eyes between Rounds 8 and 9, about 5 stitches apart.
Use the eyes as a guide when sewing the legs and arms.
The legs are sewn between Rounds 22 and 23. Turn the doll to one side. The very back of the leg should
be about 6 stitches away from the eye (the foot would be closer to the animal’s tummy that way). Sew
several times and in several places so the leg is securely attached to the body. Then repeat with the other
leg.
Sew the arms on Rounds 15 and 16. Turn the body to one side (just like we did with the legs). The back
end of the arm should be about 4 stitches away from the eye. I sewed the back of the arms to the body and
then I sewed the “hands” to the belly, so they stay snugged.
Position the hat so it’s about 4 rounds above the eyes and sew it to the head.
Using the whip stitch, sew the ears on Rounds 2 through 5 of the hat. Once you finish, wet the ears and
press the middle with the back of a metal hook. This will give the ears a nice shape
Sew the tail at the back of the bear, between the legs. Before finishing, insert a little stuffing.
Before attaching the binky to the face, insert the mr tail through the mr.
Insert the needle through a front loop on any stitch on the right side of the piece. Refer to the picture on the right.
Before pulling the needle all the way through the stitch, wrap the thread around it 10 times. Carefully pull
the needle through the thread and the stitch. Then insert the needle back through the mr and pull.
Attach the binky to the face, a round below the eyes. I used tacky glue in addition to sewing it to the face.
Use a cotton swab and blush to add a little pink to the cheeks.

More Amigurumi Bear and Panda İdeas

Supplies:
I use Red Heart Comfort or Red Heart Super Saver
4.5mm hook – use a smaller hook if you  see gaps in your stitches
blunt end yarn needle for sewing
scissors
100% polyester stuffing
felt, paint, buttons, or yarn for eyes or safety eyes
fabric glue for felt and buttons

This pattern uses the following stitches:
st = stitch
sc = single crochet
sl st = slip stitch
2tog = crochet 2 stitches together
f/o = finish off

How to print the pattern,
Use the free service here

Click here  for the video tutorial on how to sew the panda together and also how to do the color changes. Video was filmed in the following order

stuff and sew on muzzle
sew on eye patches
how to do the color changes
stuff the head
how to close up the body
sew on the limbs, tail, ears

If you prefer to sew on the muzzle and eye patches before the doll head is done then make all those pieces first. At the end of row 21 of the head you can sew them in place. I show how to do this in the video. In the video I sewed the eye patches too far apart so after I finished filming I took them off and glued them on closer together.

Starting with white at the top of the head working down to bottom of body:
1) magic circle  with 6sc (6)
2) 2sc in each st (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
5) 1sc in next 3st then 2sc in next st (30)
6) 1sc in next 4st then 2sc in next st (36)
7) 1sc in next 5st then 2sc in the next st (42)
8) 1sc in next 6st then 2sc in the next st (48)
9-16) 1sc in each st for 8 rows
17) 1sc in next 6st then 2tog (42)
18) 1sc in each st
19) 1sc in next 5st then 2tog (36)
20) 1sc in next 4st then 2tog (30)
21) 1sc in next 3st then 2tog (24) At the end of this row you can sew on the muzzle and eye patches
22) 1sc in next 2st then 2tog (18)
23) 1sc then 2tog  Switch colors on last 2tog (12)
24) 2sc in each st (24)
25-26) 1sc in each st for 2 rows
Cut free from the white yarn and knot off the color changes
Stuff head add in more stuffing as needed as you continue the body
27) 1sc in each st switch colors on last st of this row
28) ( sl st first st, 1sc in next 2st then 2sc in next st) for the remainder of the row, 1sc in next 3st then 2sc in next st (30)
29-31) 1sc in each st for 3 rows
After one of these rows, cut free from the darker color and knot off the color changes
32) 1sc in next 3st then 2tog (24)
33) 1sc in next 2st then 2tog (18)
34) 1sc then 2tog (12)
stuff body, add in more stuffing as needed over the next 2 rows
35) 1sc then 2tog (8)
36) 2tog twice and f/o. Weave yarn tail in and out the remaining stitching and pull tight to close the gap. Knot off and hide yarn tail in body

Tail with white or darker color:
1) magic circle with 6sc (6)
2) 2sc in each (12)
3) 1sc in each
4) 1sc in the next 2st then 2tog (9)
sl st next st and f/o leaving a long tail for sewing. Stuff then sew in place

Muzzle with white:
1) magic circle with 6sc (6)
2) 2sc in each st (12)
3) 1sc in the next 3st then 2sc in next st (15)
4) 1sc in each st
5) 1sc in the next 3st then 2tog (12)
sl st next st and f/o leaving a long tail for sewing. Add in the mouth before sewing muzzle to head. Sew most of the muzzle in place then stuff before sewing on completely.

Eye Patches with darker color:
1) magic circle with 6sc (6)
2) 2sc in each st (12)
3) 1sc in the next 3st then 2sc in next st (15)
sl st next st and f/o leaving a long tail for sewing. Stretch out and shape the patches. You can try white felt under the eyes to make the eyes stand out. Eye size in the purple panda is 10mm. The black panda has buttons

Ears with darker color:
1) magic circle with 6sc (6)
2) 2sc in each st st (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
5) 1sc in each st
6) 1sc in the next 2st then 2tog (18)
7) 1sc in each st for 1 row
8) 1sc then 2tog (12)
9) 1sc in each st
sl st next st and f/o leaving a long tail for sewing

Arms with darker color:
1) magic circle with 6sc (6)
2) 2sc in each st (12)
3-4) 1sc in each st for 2 rows
5) 1sc in next 2st then 2tog (9)
6) 2tog then 1sc in next 7st (8)
7-12) 1sc in each st for 6 rows
sl st next st and f/o leaving a long tail for sewing. Lightly stuff hand, do not stuff arm.

Legs with darker color:
1) magic circle with 6sc (6)
2) 2sc in each st (12)
3) 1sc then 2sc in next st (18)
4-6) 1sc in each st for 3 rows
7) (2tog then 1sc in next st, repeat 4 times) 1sc in next 6st (14)
8) (2tog then 1sc in next st, repeat 3 times) 1sc in next 5st (11)
9) 2tog then 1sc in next 9st (10)
10-14) 1sc in each st for 5 rows
sl st next st and f/o leaving a long tail for sewing. Stuff and shape foot and stuff leg

More Amigurumi Panda Ideas: